Commercial Paints
| Included | |
|---|---|
| Type / Base | Acrylic Latex, Flat |
| Best Use | Ceilings in commercial spaces, warehouses, manufacturing facilities |
| Interior/Exterior | Interior only |
| Coverage | 250–400 sq ft/gal depending on porosity |
| Dry Time (Touch) | 30 minutes |
| Recoat Time | 2 hours |
| Traffic Ready | Not recommended for heavy foot traffic |
| Hot Spray / Overspray Fall | Dries to dust before hitting floor – ideal for high ceilings |
| Application | Airless spray only |
| Sheen | Flat |
| Tintable | Yes |
| VOC Content | <50 g/L |
| Surface Prep | Clean, dry ceilings; remove loose material |
| Cleanup | Soap and water |
| Adhesion Strength | Excellent on primed substrates |
| Texture | Smooth, non-textured |
| Masonry Compatibility | Not designed for masonry |
| Certifications | LEED v4.1, CHPS, MPI #118 |
| Included | |
|---|---|
| Type / Base | Acrylic Latex, Semi-Gloss |
| Best Use | Ceilings where higher sheen or light reflectance is desired |
| Interior/Exterior | Interior only |
| Coverage | 250–400 sq ft/gal depending on porosity |
| Dry Time (Touch) | 30 minutes |
| Recoat Time | 2 hours |
| Traffic Ready | Not recommended for heavy foot traffic |
| Hot Spray / Overspray Fall | Dries to dust before hitting floor – ideal for high ceilings |
| Application | Airless spray only |
| Sheen | Semi-Gloss |
| Tintable | Yes |
| VOC Content | <50 g/L |
| Surface Prep | Clean, dry ceilings; remove loose material |
| Cleanup | Soap and water |
| Adhesion Strength | Excellent on primed substrates |
| Texture | Smooth, non-textured |
| Masonry Compatibility | Not designed for masonry |
| Certifications | LEED v4.1, CHPS, MPI #118 |
| Included | |
|---|---|
| Type / Base | Vinyl Acrylic Texture Coating |
| Best Use | Interior walls needing textured, impact-resistant finishes |
| Interior/Exterior | Interior only |
| Coverage | 50–150 sq ft/gal depending on application and texture |
| Dry Time (Touch) | 1 hour |
| Recoat Time | 4 hours |
| Traffic Ready | 24–48 hours for heavy contact |
| Hot Spray / Overspray Fall | N/A |
| Application | Spray or trowel application (manual skill required) |
| Sheen | Low sheen / Flat with texture |
| Tintable | Yes |
| VOC Content | <50 g/L |
| Surface Prep | Clean and patch drywall or masonry |
| Cleanup | Soap and water |
| Adhesion Strength | High – formulated for high adhesion to substrates |
| Texture | Textured – customizable knockdown look |
| Masonry Compatibility | Yes – direct-to-masonry possible |
| Certifications | LEED v4.1, MPI #135, ADA texture compliance |
| Included | |
|---|---|
| Type / Base | 100% Acrylic Block Filler |
| Best Use | Filling pores in concrete/masonry before top coating |
| Interior/Exterior | Interior / Exterior |
| Coverage | 75–125 sq ft/gal depending on porosity |
| Dry Time (Touch) | 2 hours |
| Recoat Time | 4 hours |
| Traffic Ready | 48–72 hours before topcoat if under high humidity |
| Hot Spray / Overspray Fall | N/A |
| Application | Brush, roller or spray |
| Sheen | Flat |
| Tintable | No |
| VOC Content | <50 g/L |
| Surface Prep | Surface must be clean, dry, and free of loose particles |
| Cleanup | Soap and water |
| Adhesion Strength | Strong adhesion to concrete and porous block |
| Texture | Smooth – fills pores but leaves flat profile |
| Masonry Compatibility | Yes – optimized for masonry surfaces |
| Certifications | LEED v4.1, MPI #4, masonry certified |
 |  |  |  | |
|---|---|---|---|---|
| Product | Latex Dry Fall - Flat | Latex Dry Fall - Semi-Gloss | Knockdown Commercial Paint | Benjamin Moore Block Filler |
| Price | Buy Now From $46.99 | Buy Now From $46.99 | Buy Now From $46.99 | Buy Now From $46.99 |
| Type / Base | Acrylic Latex, Flat | Acrylic Latex, Semi-Gloss | Vinyl Acrylic Texture Coating | 100% Acrylic Block Filler |
| Best Use | Ceilings in commercial spaces, warehouses, manufacturing facilities | Ceilings where higher sheen or light reflectance is desired | Interior walls needing textured, impact-resistant finishes | Filling pores in concrete/masonry before top coating |
| Interior/Exterior | Interior only | Interior only | Interior only | Interior / Exterior |
| Coverage | 250–400 sq ft/gal depending on porosity | 250–400 sq ft/gal depending on porosity | 50–150 sq ft/gal depending on application and texture | 75–125 sq ft/gal depending on porosity |
| Dry Time (Touch) | 30 minutes | 30 minutes | 1 hour | 2 hours |
| Recoat Time | 2 hours | 2 hours | 4 hours | 4 hours |
| Traffic Ready | Not recommended for heavy foot traffic | Not recommended for heavy foot traffic | 24–48 hours for heavy contact | 48–72 hours before topcoat if under high humidity |
| Hot Spray / Overspray Fall | Dries to dust before hitting floor – ideal for high ceilings | Dries to dust before hitting floor – ideal for high ceilings | N/A | N/A |
| Application | Airless spray only | Airless spray only | Spray or trowel application (manual skill required) | Brush, roller or spray |
| Sheen | Flat | Semi-Gloss | Low sheen / Flat with texture | Flat |
| Tintable | Yes | Yes | Yes | No |
| VOC Content | <50 g/L | <50 g/L | <50 g/L | <50 g/L |
| Surface Prep | Clean, dry ceilings; remove loose material | Clean, dry ceilings; remove loose material | Clean and patch drywall or masonry | Surface must be clean, dry, and free of loose particles |
| Cleanup | Soap and water | Soap and water | Soap and water | Soap and water |
| Adhesion Strength | Excellent on primed substrates | Excellent on primed substrates | High – formulated for high adhesion to substrates | Strong adhesion to concrete and porous block |
| Texture | Smooth, non-textured | Smooth, non-textured | Textured – customizable knockdown look | Smooth – fills pores but leaves flat profile |
| Masonry Compatibility | Not designed for masonry | Not designed for masonry | Yes – direct-to-masonry possible | Yes – optimized for masonry surfaces |
| Certifications | LEED v4.1, CHPS, MPI #118 | LEED v4.1, CHPS, MPI #118 | LEED v4.1, MPI #135, ADA texture compliance | LEED v4.1, MPI #4, masonry certified |